Rijtheorie HubPractise the CBR theory in 12 languagesFree on the App Store
OpenOpen
Home › Blog › Solid line and broken line on Dutch roads: when may you cross them?

Solid line and broken line on Dutch roads: when may you cross them?

You may not cross a solid line (doorgetrokken streep) between lanes. You may cross a broken line (onderbroken streep), for example to overtake or to change lanes. That is in Article 76 of the RVV 1990, with three exceptions.

Article 76, paragraph 1 of the RVV 1990: you may not cross a solid line that is not along the edge of the carriageway. If the line is between lanes with traffic in both directions, you may not be to the left of it either.

Solid line and broken line: the difference

LineMay you cross it?
Broken lineYes, if it can be done safely and you let other traffic go first
Solid line between lanesNo (Article 76, paragraph 1)
Solid line with a broken line next to itOnly from the side of the broken line (Article 76, paragraph 2 under b)
Solid edge line along the edge of the carriagewayDoes not fall under the ban in Article 76

In Dutch some people say ononderbroken streep or doorgetrokken lijn. The law uses the word doorgetrokken streep (solid line). What is a broken line? A line with gaps, in Dutch also called onderbroken lijn. The RVV 1990 names only these two types. It is one of the road markings you must know for the exam.

May you drive over a solid line?

In three cases you may (Article 76, paragraph 2):

  1. Hard shoulder, emergency bay or rush-hour lane. You may cross the line to reach or leave an emergency bay (vluchthaven), hard shoulder (vluchtstrook) or rush-hour lane (spitsstrook) next to your lane. The hard shoulder itself is only for emergencies (Article 43, paragraph 3).
  2. Broken line on your side. If there are two lines next to each other and the line on your side is broken, you may cross them. Traffic on the other side may not.
  3. Cycle lane. Drivers who may use the cycle lane (fietsstrook) may cross the solid line between the cycle lane and the lane next to it.

Which solid line may you cross without an exception? The line along the edge of the carriageway. The next part is about that.

Solid edge line: the line along the edge

The ban in Article 76 applies to lines that are not along the edge of the paved carriageway. So a solid edge line (doorgetrokken kantstreep) falls outside it. That does not mean that everything behind it is free. On a motorway (autosnelweg) or expressway (autoweg) the hard shoulder lies behind the solid line, and you may only use that in emergencies. You may not use a cycle lane with a solid line with your car (Article 10, paragraph 2). In its driving procedure the CBR also asks you to respect solid lines that do not divide the carriageway into lanes, such as edge lines.

Outside the built-up area (bebouwde kom) the edge line also says something about the speed. According to the ANWB, solid edge lines belong to a road where you may drive 100 km/h and broken edge lines to a road where you may drive 80 km/h. The sign remains the boss.

Overtaking at a solid line

Overtaking across a solid line is not allowed. The Dutch government (Rijksoverheid) puts it briefly: at a solid single or double centre line, overtaking other vehicles is banned. On a road with traffic in both directions you may not be to the left of the line either. All rules about overtaking are in overtaking and the overtaking ban.

The CBR names one exceptional situation: when passing an obstacle, such as a lorry that is unloading next to a solid line, you sometimes have to act against the traffic marking. Only do that if you cannot drive on otherwise, and do not hinder anyone.

What does a double broken line on the road mean?

A double line on the road, in the middle, says something about the speed. Outside the built-up area, double white centre lines without green between them mean 80 km/h, and with green between them 100 km/h, as long as signs do not show anything else. May you overtake at a double broken line? Yes, if it can be done safely and there is no overtaking ban. If the double line is solid, you may not overtake. So a broken double line does not ban overtaking, a solid double line does.

A solid line with green in between is the centre line of a 100 km/h road. See the green line on the road and recognising types of roads.

Centre of the road (as van de weg) and centre line (asstreep): what are they?

The as van de weg is the centre of the road. The law speaks of the wegas (road axis): anyone who wants to turn left may get in lane by driving as close as possible to the road axis (Article 17, paragraph 1 of the RVV 1990). So driving against the centre of the road (tegen de as van de weg) means: as far as possible towards the middle, without getting onto the half of the road for oncoming traffic. The word asstreep is not in the RVV 1990. It is the line on the road axis. The Dutch government calls it the centre line (middenstreep); where there are two lines the ANWB speaks of a double centre line (dubbele asstreep).

Solid line on the motorway

On the motorway you come across the solid line next to the hard shoulder and at a rush-hour lane. If the rush-hour lane is open, you may cross the solid line to get onto it and off it. At a block marking (blokmarkering) you may change lanes. If the line along the kerb is yellow and broken, or if it is a solid yellow line, it is not about driving but about parking and stopping at a yellow line.

Fine for crossing a solid line

Offence (car)Offence codeAmount 2026
Crossing a solid line, traffic in one directionR 617 a€190
Crossing a solid line, traffic in both directionsR 617 b€320
Driving to the left of the solid line, traffic in both directionsR 617 c€320

The amounts come from the list of offence codes (Tekstenbundel feitcodes) of the Public Prosecution Service (Openbaar Ministerie), January 2026 edition. You can practise with the questions about traffic rules.

Frequently asked questions

May you drive over a solid line?

No, except to reach or leave a hard shoulder, emergency bay or rush-hour lane, if there is a broken line on your side, or if you may use the cycle lane (Article 76, paragraph 2 of the RVV 1990).

May you overtake at a double broken line?

Yes. A double broken line does not ban overtaking. It does have to be safe and there must be no sign with an overtaking ban.

What is a solid line with small gaps?

The RVV 1990 only knows the solid line and the broken line. There is no separate rule in the RVV 1990 for a line with small gaps. The ban in Article 76 only names the solid line.

What does a green solid line mean?

Green between two solid centre lines means a road where you may drive 100 km/h, unless a sign says something else. Because the lines are solid, you may not overtake there.

What is the centre of the road (as van de weg)?

The middle of the road. The RVV 1990 calls this the road axis (wegas): when turning left you may get in lane by driving as close as possible to the road axis (Article 17).

Is an edge line the same as a solid line between lanes?

No. The ban in Article 76 does not apply to the line along the edge of the carriageway. What lies behind the edge line, such as a hard shoulder or cycle lane, does have its own rules.

Sources, read on 14 November 2026: RVV 1990, artikel 76 (doorgetrokken streep); RVV 1990, artikelen 10, 17 en 43; Rijksoverheid, wat betekenen de strepen op de weg; ANWB, strepen op de weg; ANWB, tekens op de weg; ANWB, snelheid in het verkeer: de regels; Veilig Verkeer Nederland, doorgetrokken streep; CBR, Rijprocedure B (versie 1 januari 2024); OM, Tekstenbundel feitcodes januari 2026 (R 617 a, b en c). Rijtheorie Hub is not affiliated with the CBR.

Want to practise? Try the free questions on road signs and markings, with an explanation for every answer.

Practise this with 2,606 questions and 19 animations

Rijtheorie Hub practises exactly like the CBR exam: 50 questions, 30 minutes, pass with 44. Free to try, in 12 languages.

Download free Get it on Google Play